• Pre-Cut Shark Teeth Decal
• Precision Cut to Fit Dodge Charger and Challenger
• High Grade Vinyl Material
• Will Not Leave Stains or Residue to Car
• Pressure Activated Adhesive (Works best on smooth surfaces)

Basic installation instructions:
1) Wipe down and clean the area your decal/s will go. Make sure the area is clean, free from dirt and debris.
2) Peel off the decal and transfer tape from the backing paper.
3) Carefully apply the decal onto the area. Make sure to lay the decal flat eliminating all air bubbles. If needed, use a felt edge tool or squeegee to assist with application.
4) Carefully and slowly remove the transfer tape from the decal.
5) Repeat steps for any additional decal. Press firmly and gently rub the decal with a microfiber cloth or a felt squeegee tool while applying heat to assist with adhesion. 100% satisfaction guaranteed!

Please feel free to contact us if you have any questions or issues.