General Instructions

CAUTION: CONTAMINATED WATER WILL CAUSE THE FILM TO BECOME HAZINESS/FOGGINEZZ (IF WEATHER IS TOO HOT, WATER WILL EVAPORATE FASTER WHICH CAN LEAVE SOAP BEHIND, CAUSING HAZINESS/FOGGINEZZ)

Temperature: 

Recommend installation temperature: 70-90 degree Fahrenheit

Here are step-by-step instructions for installing an infotainment screen protector:

Materials You Will Need:
- Infotainment screen protector
- Microfiber cloth
- Squeegee

Step 1: Clean the Screen

• Turn off the infotainment screen. This reduces the chance of static buildup and helps you see dust and smudges.
• Use the microfiber cloth to gently wipe the screen, removing dust, smudges, and fingerprints.
• Spray alcohol on a towel and wipe away any left over oils & smudges. This removes oils and other debris.
• Dry the screen with a dry towel to ensure there is no moisture remaining.
• Make sure the screen is completely clean and dust-free before proceeding.

Step 2: Align the Screen Protector

• Hold the screen protector above the infotainment screen, aligning the screen protector to the center of the screen.
• Pay attention to any buttons, sensors, or cutouts, and make sure these line up perfectly before applying.

Step 3: Apply the Screen Protector

• Peel off the adhesive backing on the screen protector. Be careful not to touch the adhesive side with your fingers.
• Spray a light mist of water onto to the adhesive side of the screen protector.
• Carefully align the protector and slowly press it onto the screen to prevent the film from sliding.
• Use a squeegee or your fingers to gently press down from the center outward to eliminate air bubbles as you apply the protector. Work slowly to ensure a smooth application.

Step 4: Remove Air Bubbles

• If any bubbles remain use the squeegee or a credit card wrapped in a microfiber cloth to push them toward the edges of the screen.
• For smaller bubbles, they may dissipate on their own after 24-48 hours.

Step 5: Final Check

• Wipe the screen protector with the microfiber cloth to remove any fingerprints or dust.
• Turn on the infotainment screen to ensure everything looks clear and functions properly.

By following these instructions, you’ll have a clean, bubble-free installation that protects your infotainment screen from scratches and smudges.

Dry overnight, and do not wash your car for at least 24 hours. Thank you for your business and enjoy your Windshield Protection from Bogar Tech Designs!

 

Click here to visit our Youtube Channel for more Tutorials:

 

Want to get featured?