General Instructions

CAUTION: CONTAMINATED WATER WILL CAUSE THE FILM TO BECOME HAZINESS/FOGGINEZZ (IF WEATHER IS TOO HOT, WATER WILL EVAPORATE FASTER WHICH CAN LEAVE SOAP BEHIND, CAUSING HAZINESS/FOGGINEZZ)

Temperature: 

Recommend installation temperature: 70-90 degree Fahrenheit

Here are step-by-step instructions for installing the side mirror anti fog precuts:

Materials You Will Need:
- Side mirror precuts
- Microfiber cloth
- Squeegee

Step 1: Clean the Side Mirror Glass

• Use the microfiber cloth to gently wipe the glass, removing dust, smudges, and fingerprints.
• Spray alcohol on a towel and wipe away any left over oils & smudges. This removes oils and other debris.
• Dry the side mirror glass with a dry towel to ensure there is no moisture remaining.
• Make sure the side mirror is completely clean and dust-free before proceeding.

Step 2: Align the Screen Protector

• Hold the film above the side mirror glass, aligning the precut to the center of the side mirror glass.

Step 3: Apply the Screen Protector

• Peel off the adhesive backing on the side mirror precut. Be careful not to touch the adhesive side with your fingers.
• Spray a light mist of distilled water onto to the adhesive side of the side mirror precut.
• Carefully align the precut and slowly press it onto the side mirror glass to prevent the film from sliding.
• Use a squeegee or your fingers to gently press down from the center outward to eliminate air bubbles as you apply the precut. Work slowly to ensure a smooth application.

Step 4: Remove Air Bubbles

• If any bubbles remain use the squeegee or a credit card wrapped in a microfiber cloth to push them toward the edges of the screen.
• For smaller bubbles, they may dissipate on their own after 24-48 hours.

Step 5: Final Check

• Wipe the side mirror with the microfiber cloth to remove any fingerprints or dust.

By following these instructions, you’ll have a clean, bubble-free installation that's free from scratches, smudges, & debris.

Dry overnight, and do not wash your car for at least 24 hours. Thank you for your business and enjoy your Windshield Protection from Bogar Tech Designs!

 

Click here to visit our Youtube Channel for more Tutorials:

 

Want to get featured?