Vehicle Specific Installation Videos:
UNIVERSAL INSTRUCTIONS
Tools Included With Orders
- Squeegee
- Cutting blade
- Microfiber towel
- Syringe (with baby shampoo)
- Empty spray bottle (for slip solution)
- Ready-to-go small tack solution spray bottle (isopropyl alcohol & distilled water)
Tools Recommended For Best Results
-
Heat gun or hair dryer
-
Isopropyl alcohol (IPA): 70%–90%
-
Distilled water (Tap water may leave residue due to minerals)
Solution Mixtures
-
Tack Solution: Isopropyl alcohol & distilled water (50/50 ratio).
-
Slip Solution: Baby shampoo & hot distilled water (4 ml per 16 oz. of water). Adjust baby shampoo based on weather:
-
Hot/humid weather: More shampoo.
-
Cold weather: Use hot water.
Installation Instructions
-
Prepare the Lens:
-
Clean the surface thoroughly before application.
-
Spray slip solution onto the lens and sticky side of the tint to prevent sticking.
-
Apply Tint:
-
Start with flat pieces to practice before attempting curved surfaces.
-
Place the adhesive side of the tint on the lens, starting from one corner. Stretch the film as needed to remove wrinkles.
-
Anchor the Film:
-
Anchor one corner by lifting it and spraying tack solution underneath.
-
Push out air bubbles/moisture using a towel-wrapped squeegee to prevent scratches.
-
Stretch and Adjust:
-
Spray slip solution under the film as you stretch it to cover the lens.
-
Reapply tack solution for large bubbles and smooth them out.
-
Heat and Trim:
-
Use a heat gun/hair dryer to conform the film to the lens.
-
Trim edges with an Xacto knife or roll excess film around the lens edge using heat.
-
Final Touches:
-
Check for bubbles after a few hours and work them out as needed.
-
Tiny bubbles or foggy appearance will evaporate in a few days.
Important Notes
-
Drying Time: Do not wash the car for 48 hours. Avoid highway speeds until the film adheres fully.
-
Bubble Removal: Large bubbles can be popped with a sewing needle and sealed with heat.
-
Film Removal: Heat an edge and peel slowly, removing residue with Goo-Gone or similar products.
Additional Information
-
Support: Contact us via the messaging system for assistance before leaving negative reviews.
-
Videos: Search “How To: Working With Bogar Tech Designs Tint Film” on YouTube for tutorials.
-
Professional Installation: Recommended if you feel unable to install the film yourself.
-
Street Legality: Check local laws regarding tint overlay legality. Use at your own risk.